SATISH BOGA
Eindhoven
Profielschets
PMP certified Mechanical Engineer with over 20 years of experience across Life Sciences, Consumer Products, Automotive, Heavy Engineering, and Oil & Gas:
- Product Design - Product development - Life cycle Management - Project Management - Configuration management - CAD
Experienced in end-to-end project management, product development, and lifecycle management in multicultural environments International experience in a multicultural work environment with: 9 years in the Netherlands, 4 years in the USA, and 7 years in India. Results-focused and proactive in planning day-to-day operations and solving service issues. Offers advanced abilities in tackling issues impacting team and business success. Excels at managing team and personal time to consistently exceed expectations.
Overzicht
20
20
years of professional experience
Werkervaring
Project Lead
Fujifilm Manufacturing Europe BV
Tilburg
2022.02 - Current
- Lead Project from initiation phase to closure of the project while balancing the triple constraints.
- Point of contact with suppliers, sharing requirements with suppliers, requesting quotes, participating in design development, visiting suppliers for FAT.
- Prepare Project planning, Cost estimation, Timeline, Decision Analysis, Feasibility study, Request for quote, Statement of Work.
- Review Layouts, Basis of Design (BOD), URS, Engineering study protocols, Component Impact Analysis, and industrial safety documents. Process flow mapping, Value Stream Mapping, Quote, Design documents.
- Monitoring budget and resources, analyzing project progress and outcomes, and communicating with stakeholders.
- Coordinate Civil and Utility work required for the installation of equipment.
- Coordinate SAT, IQ/OQ, and PQ activities and making sure it's documented correctly.
- Negotiated contracts with suppliers and service providers, securing favourable terms and reducing project costs.
- Cultivated strong relationships with external partners and vendors, enhancing collaboration and support on project activities.
Development Lead
Philips consumer lifestyle via Cyient
Eindhoven
2016.09 - 2022.01
- Owned lifecycle management of ~800 SKUs, high volume new product introduction.
- Led development team for commercial, quality, safety, and regulatory projects.
- Coordinated as an interface between multidisciplinary functions from requirement gathered to product launch in the market.
- Prepared Project planning, cost estimation, timeline, Resource allocation plan.
- Arranged operational meetings, implementated monitoring, and mentor team.
- Participated in DFMEA, PFMEA, HBSRA, and Impact analysis meetings.
- Arranged escalation meetings and performed problem-solving with 8D practice.
- Participated in Kaizen for improvement of process and reduction of waste in the process.
- Approved Engineering change notices as change admin (CAII) in the Windchill system.
- Ensured that Product requirements are systematically defined and documented via DOORS.
- Created a collaboration package and defined a statement of work (SoW) for suppliers.
- Interface between suppliers in development phase of the project and defined the way of work (WoW).
- Delivered compliance strategies saving ~€200K annually.
- Prepared Compliance verification plans and tracked compliance evidence for products of my sub-business.
- Set acceptance criteria for qualification of parts, submitting deviation based on risk assessment, and defining mitigation plan.
- Coordinated with an external test house for compliance verification testing. Arranged samples for Compliance testing.
- For Material change and new tooling projects: Prepared verification plans, Test design, reviewed metrology results for FAT, SAT, capability of the process, and signed off PSW.
Design Engineer
Harley Davidson via Cyient
Milwaukee, USA
2010.09 - 2016.04
- Designed automotive lighting and accessories, Delivered products from concept to production.
- Design, plan, organize, and execute engineering projects and deliver them with a high degree of quality with cost and timing expectations of stakeholders.
- Requirement Gathering, Feasibility study, Product Designing, Prototype building, Modeling and detailing, Fitment checkups, testing activities, and providing mark-ups for Instruction sheets.
- Studied the Product requirements, Designed the products according to PRD.
- Interacted with stakeholders, and internal staff assigned to the project, as well as provided timely support to outside vendors for Design and developmental activities.
- Coordinated project operations to ensure the timely accomplishment of targets within the time and cost parameters laid by the stakeholders.
- Designed components, integrated components in the bigger system, and validated components and systems to check adherence to functional and non-functional requirements.
- Updated design according to test results and manufacturing limitations to get the final product per requirements.
- Processed Engineering Change Notice and Authorized new parts through the Harley Davidson Product life cycle management system.
- Ensured documentation of the project, technical datasheets, detailed manufacturing drawings & quality inspection reports.
- Developed fixtures for tests and verification of different parts.
Team Lead
Peerless Mfg. Co. via Cyient
Hyderabad, India
2011.03 - 2011.12
- Led a team of 5 associates to design pressure vessels based on ASME Boilers and Pressure Vessel.
- Studied customer requirements identify, collect, and validate the required inputs from the customer for executing the project.
- Prepared Project plan, schedule, resource management, and mentor team.
- Product Designing of Pressure vessels and internals like Vane type separators, Centrifugal Separators, Filter Separators, Gas Filters, Ultra vane unit & Ultra filter bundle, Vertical Gas Separator, Plug Assemblies and Master Vane design.
- Designed 3D models using Pro-E (Top-down modeling methodology) and Manufacturing drawings for final assembly using Drafting User Tool and uploaded drawings into Windchill.
- Quality check, and technical product documentation of the project.
- Ran compress calculations based on ASME Sec. VII Div-1 code & any special considerations note per customer requirements.
- Prepared fabrication drawings for separation and Filtration products.
Design Engineer
TORO via Cyient
Hyderabad, India
2007.10 - 2010.08
- Handled Engineering Change Management (ECMs), Work orders, Reverse Engineering of products, Legacy conversions, Remastering, and DMR conversion to client standards.
- Led team of 6 associates, trained and mentored associates.
- Provided daily status and discuss project-related queries or issues with the client.
- Legacy conversion, drawings to 3D parametric models, and non-parametric models to parametric models.
- Converted DMR and technical documentation of the acquired company to TORO standards.
- Parametric Modeling with the help of scan and CMM data for reverse engineering and Detailing.
- Configure Sub-assemblies and Main Assembly of the Machines with the help of Owner's Manuals and SAP BOM.
Design Engineer
DRD Body Tech’s India Pvt. Ltd
Hyderabad, India
2006.02 - 2007.10
- Worked on several projects related to new Product design, Product development, Value Engineering, Reverse Engineering, resource management.
- Designed 150-ton SCR trailer and 65-ton Mud Pump trailer.
- Designed Special purpose trailers.
- Reverse Engineering of Garbage compactor.
- Value Engineering of Tipper body for Ashok Leyland 2516.
- Product development of Recovery van.
- Responsibilities: Collected design requirements from the customer and continued interaction to update status.
- Collected geometrical and functional specifications of the existing machine for Reverse Engineering.
- Presented Design proposals to reduce the waste of material in production to the client.
- Handed calculations for skeleton design, Structural Analysis in Ansys software.
- Redesigned the mechanism to simplify functionality without compromising its effective working.
- Analyze the complete working of the new design in Pro-Mechanism.
- Prepared Layout wire harness and route fluid lines on the trailer.
- Prepared manufacturing drawings and release them to the manufacturing department.
- Supervised the production of trailers to meet client timelines.
- Collected material quality reports, welding testing reports, and quality regulatory reports.
- A truck bodybuilding and trailer manufacturing company
Opleidingen
Bachelor’s degree - Mechanical Engineering
Shivaji University
KolhapurVaardigheden
- Creo Parametric
- Unigraphics NX
- Auto-CAD
- Solidworks
- Windchill
- Intralink
- Cemafore
- MasterControl
- SAP
- Minitab
- CQM Tolerance designer
- Microsoft Project
- Word
- Excel
- PowerPoint
- Microsoft Teams
- OneNote
- DOORS
Languages
English, Hindi, Marathi, Telugu, kanada, Dutch
First languages
Aangepast
Creo Parametric, Unigraphics NX, Auto-CAD, Solidworks, Windchill, Intralink, Cemafore, MasterControl, SAP, Minitab, CQM Tolerance designer, Microsoft Project, Word, Excel, PowerPoint, Microsoft Teams, OneNote, DOORS
Certifications and Trainings
PMP Certified- valid till May 2028
VCA Certified – valid till 2032
Clean room Behavior training,
ATEX Design basic training.
Last Minute Risk Assessment (LMRA) training.
Tijdlijn
Project Lead
Fujifilm Manufacturing Europe BV
2022.02 - Current
Development Lead
Philips consumer lifestyle via Cyient
2016.09 - 2022.01
Team Lead
Peerless Mfg. Co. via Cyient
2011.03 - 2011.12
Design Engineer
Harley Davidson via Cyient
2010.09 - 2016.04
Design Engineer
TORO via Cyient
2007.10 - 2010.08
Design Engineer
DRD Body Tech’s India Pvt. Ltd
2006.02 - 2007.10
Bachelor’s degree - Mechanical Engineering
Shivaji University